The government should do more to promote energy efficiency or risk finding itself in an even more difficult position next year.
That’s the view of the Institute for Government. Its new report finds that the UK’s homes are amongst the least energy efficient in Europe.
The report will resonate with those concerned at energy efficiency issues within the private rental sector.
It says: “The Johnson government and now seemingly the Truss government have so far ignored energy efficiency in their responses”.
The IfG report says the UK is paying the price for a decade of failure on energy policy, with ministers giving the issue insufficient attention.
It says the new Truss government has been forced into adopting “a series of necessary but suboptimal policies this year in the face of a catastrophic rise in energy prices”.
But it warns that if the government focuses only on short-term financial support, and long-term measures to boost supply that are unlikely to have a major impact, it will find itself in an even more difficult position in a year’s time.
“Funding very high energy costs through borrowing, without a strategy to reduce demand, will prove unsustainable” warns the IfG.
Citing successful campaigns in some other countries it adds: “Launched immediately, a concerted national effort to improve energy efficiency could deliver significant savings within a year – and substantial benefits in the years beyond.
“Such a programme was already required if the UK is to stay on track for net zero. In an era of energy instability, it should now be seen as critical for protecting consumers and businesses and boosting resilience.”
You can see the very extensive IfG report here.
Join the conversation
Jump to latest comment and add your reply
I've posted this before but I've taken this matter into my own hands. I haven't got time to wait for the Government
I have a 3-bed rental, built in 1959 and it's not Listed. It was an EPC Grade E and my tenant was complaining of high energy bills last winter.
1. I got my domestic EPC assessor to prepare a draft 'as is' EPC and a draft 'predicted' EPC for the house based on the refurb I was planning to do.
2. My handyman installed 100mm of loft insulation between the joists and then an extra 200mm layer of loft insulation at right angles across the joists. This is current Building Regs standard for a new house. Loft insulation is £24 for a big roll at B&Q
3. I had a Google Nest thermostat/timer installed. I ordered this direct from Google and a professional installer fitted it within the price.
4. My plumber installed TRVs on all the rads and showed the tenant how to use them.
5. My electrician fitted a 'kill switch' by the front door wired into the lighting circuits of the Distribution Board. As the tenant leaves the house one push of the button turns off all the lights in the house. Very simple and effective.
6. My handyman changed all non-LED lamps over to Philip LED lamps
7.I had already got my handyman to install solid insulation board between the joists on the ground floor prior to some recarpeting that I did a few years ago.
8. Pioneer Insulation fitted external wall insulation around the walls. This was a big investment but the house now looks brand new and it's a unit that I'm holding long-term.
9. I couldn't justify the expense of new windows so I bought 'poor man's' secondary glazing from a small British company called WindowSkin. I used their product before to cover a large sash window in the winter in a draughty office that I use to rent. It's a custom cut piece of totally clear Perspex that clips on the inside of the window frame in winter to cut out 100% of window draughts. Stores under a bed in the summer.
10. Whilst we were at it my handyman installed a Nuaire DriMaster Heat Positive Input Ventilation (PIV) unit up in the ventilated loft with a outlet in the 1st floor landing ceiling. The tenant was moaning about condensation and being unable to dry clothes/towels. This simple fit-and-forget unit has totally solved these problems.
11. My EPC assessor came back after I had completed these works and gave the house an EPC Grade B by one point (score 81)). This certificate stays on the national database for the next 10-years.
My mortgage broker expects to be able to get a better rate for me now that I have a 10-year valid EPC Grade B when I have to refinance next year.
The above project took me about 10 x phone-calls and 2 x site visits to sort out. It really wasn't that onerous and I was surprised how straightforward it was after I’d done the initial research
I'm now close to finishing a similar package of works on my own family home – this will raise it from an EPC Grade E to a Grade C and will start to really reduce my energy bills in the next few weeks.
Mathew, lve responded to your post on another site. Your PIV unit will use a lot of electricity over the year.Unless you have a small loft it can use a lot of fibreglass,persons installing it need protective clothing. Roof and floor joists of softwood are regarded as thermal briding. To install floor insulation invariably needs the floor taken up.Your double glazing is temporary and shouldn't count. External wall insulation, normally polystyrene covered with a sand cement render is very weak and very expensive. Smart thermostats are a bit of an expensive con.
Please login to comment